Atasi Crash Setelah Update Windows XP SP3

Atasi Crash Setelah Update Windows XP SP3
============ ========= ========= ========= ==

1. Masalah pada power management Windows XP SP3
============ ========= ========= ========= =====
Bila anda berencana mengupdate Windows XP dengan Service pack 3. Ada kemungkinan Windows XP anda akan crash setelahdipatch dengan SP3.Masalahnya sistem boot terjadi kesalahan dan berhenti dengan menampilkan error 0×000007e.
Tetapi computer bisa berjalan normal ketika di start dengan safe mode.
Sementara masalah muncul di sejumlah computer buatan HP yang kebanyakan mengunakan procesor AMD.
Sebenarnya baik AMD dan Intel memiliki potensi yang sama terjadinya crash. Beberapa kasus juga terjadi bagi
video driver dan laporan lain secara random.
Intel mengunakan file driver intelppm.sys dan AMD mengunakan amdk8.sys dengan fungsi yang sama untuk pengaturan
power management.
Untuk menanggulangi crash tersebut untuk procesor Intel, cukup mengikuti langkah seperti dibawah ini dengan setting
safe mode :
a. Run regedit
b. Click on HKEY_LOCAL_MACHINE
c. From the File menu, select “Load hive”
d. Arahkan ke bagian %systemdriver% \Windows\ System32\ Config dan dan cari file bagian System
e. Cari bagian “horked”
f. Arahkan ke bagian horked\ControlSet00 1\Services\ IntelPPM
g. Click dua kali di Start value dan set ke angka 4
h. “If you did what I did and completely destroyed things by running a disk check”,
navigate to ControlSet001\ Control\SessionM anager buka bagian BootExecute value dan hapus autochk entries
i. Ikuti langkah 6 sampai 8 untuk kontrol setting lainnya.
j. Reboot

2. Masalah lain masalah crash Windows XP SP3
============ ========= ========= ========= ==
Masalah terjadi bila BIOS computer kurang compatibel dengan ACPI complaint.
Ada baiknya mengupdate BIOS. Error muncul dengan pesan STOP:0×000000A5.
Hal ini memang tidak pasti terjadi, khususnya penguna custom PC dengan board Asus A8N32-SLI
sudah memberikan laporan masalah tersebut. Beberapa board dengan procesor berbeda bisa saja tidak terjadi masalah
yang sama.

3. Pesan stop lain error 0×00000024
============ ========= ========= ==
a. Bila anda mendapat pesan seperti diatas, ada beberapa cara untuk menanggulangi
1. Baca informasi lebih lanjut dari information in the Microsoft knowledge base untuk memastikan masalah
(http://support. microsoft. com/kb/935806)
2. Bila anda mengunakan beberapa harddisk, coba di lepas satu persatu untuk mengetahui harddisk yang bermasalah
3. Jalankan CHKDSK /r untuk pemeriksaan harddisk, diharapakan computer dapat melakukan reboot dengan baik.
Tetapi bila masih terjadi pesan 0×00000024 dan terjadi juga pada safe mode.
Ada baiknya mengunakan langkah dengan software pembantu seperti Recovery Console atau WinPE.
4. Lalu ganti file ntfs.sys driver untuk mengantikan file yang telah corrupt pada tempat yang sama dari backup copy
di the %windir%\system32\ dllcache.
Bila pengantian file yang rusak masih memiliki masalah yang sama, ganti file dari folder %windir%\system32\ drivers
dari folder dllcache.
b. Info dari Microsoft atas error 24
1. A “Stop: 0×00000024″ error message occurs when Windows Vista encounters an unrecoverable error when it tries
to access an NTFS partition or a volume on the hard disk. Typically, you receive a “Stop: 0×00000024″
error message during Windows Vista Setup when one or more of the following conditions are true:
The file system or partition structure is corrupted.
2. A driver compatibility issue exists. For example, the file system driver for an antivirus program or
for other utility can cause this issue.
To troubleshoot a “Stop: 0×00000024″ error message when you try to upgrade to Windows Vista,
use one or more of the following methods, as appropriate for your situation.
(Caution We recommend that you perform a full backup before you implement any of the following methods)
-) Method 1: Run the CHKDSK program
To run the CHKDSK (Chkdsk.exe) program, follow these steps:
1. Use the Windows Vista DVD to start the computer in Windows Recovery (WinRE).
For more information about how to start Windows Recovery, visit the following Microsoft Web site:
(http://windowshelp .microsoft. com/Windows/ en-US/Help/ f768809f- ed90-415f- a83f-89b42108b35 51033.mspx)
2. In WinRE, open a command prompt. To do this, follow these steps:
a. On the Install Windows screen, select the appropriate Language to install, Time and currency format
and Keyboard or input method options, and then click Next.
b. Click Repair your computer.
c. Click the Vista installation that you want to repair, and then click Next.
Note Click Load Drivers only if you have to load a driver to access a hard disk.
d. Click Command Prompt.
3. At the command prompt, type the following command, and then press ENTER: chkdsk drive: /r
Note In this command, drive is the hard disk where you want to install Windows Vista.
4. If Chkdsk.exe does not find and does not repair any errors on the hard disk where you want to
install Windows, run Chkdsk.exe on any other NTFS hard disks on the computer.
To verify the partitions that are configured on the computer, follow these steps:
a. At the command prompt, type the following command, and then press ENTER: Diskpart
b. At the DISKPART prompt, type the following command, and then press ENTER: List vol
Note the hard disk information that is returned.
c. At the DISKPART prompt, type the following command, and then press ENTER: exit
d. At the command prompt, type the following command, and then press ENTER: exit
-) Method 2: Check for driver issues
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users
or by malicious software such as viruses. We do not recommend this workaround but are providing this
information so that you can implement this workaround at your own discretion.
Use this workaround at your own risk.
If you are upgrading to Windows Vista, follow these steps:
1. Install updated disk controller drivers.
2. Uninstall any antivirus, any antispyware, or any backup programs that monitor the file system for changes.
3. Try to upgrade to Windows Vista again.

4. Mengunakan alternatif lain dengan Recovery Console dari XP
============ ========= ========= ========= ========= ========= =
* Bila computer memang sudah tidak mungkin melakukan boot dari Safe Mode.
* Langkah lain adalah mengunakan Recovery Console.
* Masukan CD WIndows XP, dan Reboot via CDROM.
* Tekan R pada pilihan awal
* Dan reinstall kembali sistem Windows XP pada directory harddisk yang sama terinstall WIndows XP untuk di recover.
* Bila anda sudah me-nonaktifkan Power management seperti driver dari Intel, dan ingin mengembalikan,
cukup masuk ke command prom dan ketik “enable intelppm SERVICE_SYSTEM_ START”.

5. Recover dari Microsoft
============ ========= =
Important This section, method, or task contains steps that tell you how to modify the registry.
However, serious problems might occur if you modify the registry incorrectly.
Therefore, make sure that you follow these steps carefully. For added protection, back up the registry
before you modify it.
Then, you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, click the following article number
to view the article in the Microsoft Knowledge Base: (http://support. microsoft. com/kb/322756/ )
To resolve this issue, follow these steps:
a. Restart your computer in Safe Mode.
For additional information about Safe Mode in Windows XP,
click the following article number to view the article in the Microsoft Knowledge Base:
(http://support. microsoft. com/kb/315222/ )
A description of the Safe Mode Boot options in Windows XP
b. Click Start, click Run, type regedit, and then click OK.
c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\ SYSTEM\ControlSe t001\Services\ Intelppm
d. In the right pane, right-click the Start entry, and then click Modify.
e. In the Value data box, type 4, and then click OK.
f. Quit Registry Editor.
g. Restart your computer.

6. Mengunakan Tool dari Blog Jespert
============ ========= ========= ===
Untuk pemeriksaan dapat didownload file VB dari Jesper removeIntelPPMonAMD .vbs
(Tool ini hanya untuk masalah PC base AMD procesor)
http://obengware. com/tips/ 2008/rwindowsxps p3crashtidakbisa boot.zip